LL26 und CARD-Projekte

Gerade habe ich Zeit gefunden unsere LL24 auf LL26 hochzuziehen.
Jetzt laufen alle unsere CARD-Projekte nicht mehr. Auch in LL26 neu erstelle bringen alle den gleichen Fehler:
"Die Projektdatei ist nicht lesbar
Mögliche Gründe:

  • sie ist passwortgeschützt
  • sie hat ein ungültiges Format oder
  • sie wurde von einer neueren Version der Software erzeugt"

Hast jemand eine Idee, was hier geändert werden muss?

Debwin4 sagt dazu:

Debwin4::CSV::V1;TypeCode;Timestamp;Level;Logger;Thread;Properties;Message
▪;1000;23.02.2021 15:27:17.160;1;LL.Generic;41D8;100:2=CMLL26♦101:1=0;  load config 'D:\VERMCAD\VERMCAD_Sydney\_BW\DEBUG\resource\List&Label\Test_Card_Project\Test_Card_Project.crd'
▪;1000;23.02.2021 15:27:17.160;3;LL.Generic;41D8;100:2=CMLL26♦101:1=0;  WRN: file 'D:\VERMCAD\VERMCAD_Sydney\_BW\DEBUG\resource\List&Label\Test_Card_Project\Test_Card_Project.crd'/00000000 could be a wrong file: 'Label description' section not found
▪;1000;23.02.2021 15:27:17.160;4;LL.Generic;41D8;100:2=CMLL26♦101:1=0;  ERR: file 'D:\VERMCAD\VERMCAD_Sydney\_BW\DEBUG\resource\List&Label\Test_Card_Project\Test_Card_Project.crd'/00000000 is a wrong file: no matching section found
▪;1000;23.02.2021 15:27:17.289;3;LL.Generic;41D8;100:2=CMLL26♦101:1=0;  WRN: frame disabled

Hier ein Beispiel mit der LL26 erzeugt und gleich ohne weitere Änderungen gespeichert.
(Der 2. Aufruf der Designers bringt den Fehler.)

[File Card description]
[Description]
 Text=Test_Card_Project
 FileVersion=16
 RootTable=
 Units=SCM-Units
 Metric=3
 TextQuote.Start=1
 TextQuote.End=1
 RepresentationCode.CondStart=171
 RepresentationCode.CondSep=166
 RepresentationCode.CondEnd=187
 RepresentationCode.Tab=247
 RepresentationCode.Ret=182
 RepresentationCode.PhantomSpace=11
 RepresentationCode.LockNextChar=96
 RepresentationCode.ExprSep=164
 LCID=1031
 UserVars.ManualSortOrder=1
 Created=23.02.2021, 15:26:48
 CreatedByApp=VERMCAD.EXE [4.5.0.31]
 CreatedByDLL=CMLL26.DLL [26.0.2020.29512 (20-10-16 12:16)F]
 CreatedByUser=Lars on VERMCAD-LARS
 LastModified=23.02.2021, 15:26:58
 LastModifiedByApp=VERMCAD.EXE [4.5.0.31]
 LastModifiedByDLL=CMLL26.DLL [26.0.2020.29512 (20-10-16 12:16)F]
 LastModifiedByUser=Lars on VERMCAD-LARS
 CreatedByCallFrom=vermcad.exe
[Layout]
 P1.Template=
 xGrid=1000
 yGrid=1000
 GridShow=FALSE
 GridSnap=FALSE
 EnhancedExpressions=TRUE
 EnhancedOldExpressions=FALSE
 Decimals=2
 RealDataPreviewPageLimit=-2
 DefFont={(0,0,0),10.000000,-28,0,0,0,400,0,0,0,1,4,0,0,0,Arial}
 HelpLines.Horizontal=
 HelpLines.Vertical=
 PDF.MaxOutlineDepth=2
 PDF.MaxOutlineDepth.IDX=3
 ObjectCount=1
[UserSection]
 
[SumVariables]
[Layer]
 Name=Basis
 Condition=
 WorkspaceColor=(102,102,102)
 Visible=TRUE
 LayerID=0
[Layer]
 Name=Erste Seite
 Condition=Page() = 1
 WorkspaceColor=(197,207,10)
 Visible=TRUE
 LayerID=1
[Layer]
 Name=Folgeseiten
 Condition=Page() <> 1
 WorkspaceColor=(161,203,243)
 Visible=TRUE
 LayerID=2
[ProjectTemplates]
 [@ProjectTemplates]
  {
  [ProjectTemplates]
   {
   }
  }
[Object]
 ObjectID=5
 ObjectName=Bild
 Locked=FALSE
 LinkUUID={2EFDD7EB-B3F1-4192-B95B-8833593A3F46}
 LinkMode=32
 LayerID=0
 LayerCond=
 GroupUUID=
 Identifier=Logo
 Condition=True
 UserLocked=False
 WrapBefore=False
 ExportAsPicture=False
 Position/Left=160010
 Position/Top=10000
 Position/Width=40000
 Position/Height=27000
 Direction=0
 Frame/Layout=0
 Frame/Left/Spacing=0
 Frame/Left/Line=False
 Frame/Top/Spacing=0
 Frame/Top/Line=False
 Frame/Right/Spacing=0
 Frame/Right/Line=False
 Frame/Bottom/Spacing=0
 Frame/Bottom/Line=False
 PDFLevel=0
 PDFText=
 IndexPDFLevel=0
 IndexPDFText=
 IssueCondition=True
 Link.URL=
 Animation=""
 HTMLAnimation=""
 Mode=0
 Filename=Test_Card_Project.bmp
 bRelPath=True
 DwgSaveAsJPEG=0
 Embedded=False
 OriginalSize=False
 bIsotropic=True
 Alignment=0
[UserVariables]
[Parameters]
 [@Parameters]
  {
  [Parameters]
   {
   LL.MultiPassCondition=PrintPassIndex()=PrintPassCount()
   LL.MultiPassCount=1
   LL.ProjectDescription=Test_Card_Project
   }
  }
[UsedIdentifiers]
 Variables=
 Fields=
 ChartFields=
[PageLayouts]
 [@PageLayouts]
  {
  [PageLayouts]
   {
   [PageLayout]
	{
	DisplayName=
	Condition=True
	SourceTray=0
	ForcePaperFormat=True
	UsePhysicalPaper=True
	PaperFormat=9
	PaperFormat.cx=210010
	PaperFormat.cy=297010
	PaperFormat.Orientation=1
	Copies=1
	Duplex=0
	Collate=0
	FitPage=False
	Layout.Size.cx=210010
	Layout.Size.cy=297010
	Layout.Distance.cx=0
	Layout.Distance.cy=0
	Layout.Count.x=1
	Layout.Count.y=1
	Layout.Offset.x=0
	Layout.Offset.y=0
	LayoutPrintOrder=0
	ShowInPrintDialog=True
	}
   }
  }
[ExtendedInfo]
 [@ExtendedInfos]
  {
  [AccumulationGroups]
   {
   }
  [UIDescriptions]
   {
   0=Test_Card_Project.crd
   }
  [Subreports]
   {
   }
  }

Viele Grüße,
Lars

Der Designer ist offenbar der Meinung, dass ein Label-Projekt geladen werden sollte, kein Card-Projekt. Daher erhalten Sie auch die Fehlermeldung. Wenn Sie einmal das volle Log mit einem erfolgreichen und einem fehlerhaften Aufruf hier hochladen würde man vermutlich mehr erkennen :slight_smile: .

Danke für die superschnelle Hilfe.
“Der Designer ist offenbar der Meinung, dass ein Label-Projekt geladen werden sollte, kein Card-Projekt.”
Das war der zielführende Tipp - das hatte ich nicht aus ‘no matching section found’ und ‘‘Label description’ section not found’ rausinterpretiert.
War ein Copy-Paste-Fehler von mir beim Übertragen der eigenen Änderungen in LL-Units von LL24 nach LL26.
Viele Grüße, Lars

1 Like